20BBL Beer Brewing Machine
21/01/20191500L Fermenter
21/01/2019
Fermenter Configuration of fermenter tank
| Function:Wort Fermentation or maturation |
| Interior Shell: SUS304 full welded; TH=4mm(3mm for fermenters below 10000L) |
| Exterior Shell:SUS304 full welded; TH=2mm |
| Insulated with high density Polyurethane foam; TH=100mm(80mm for fermenter below 10000L) |
| Glycol Jacket: Dimpled plate on cone and side |
| Stringent Jacket leakage test by water and pressured gas |
| Dished head and 60 degree cone bottom |
| Sanitary side mounted manway with pressured door |
| TC connected CIP arm with 360° coverage spraying ball |
| CO2 blow-off arm with butterfly valve |
| Full sanitary metallic sealed sampling valve |
| Mechanical safe valve PVRV 2 bar on top |
| Hydraulic shock pressure gauge on CIP arm |
| Rotating racking arm and port on cone with butterfly valve |
| Tri clamp discharge arm with butterfly valve |
| Thermowell for high accuracy temperature sensor |
| 4pcs completely SUS304 heavy duty legs with leveling pad and legs support |
| Complete valves, fittings and all parts |
| Dry hopping port 4” TC with solid end cap |
| Sanitary level tube and valves TC for special request |
| Carbonation port TC with stone for special request |
| Bunging valve 0.2-2.2bar for special request |
