3000L Four Vessels Automatic Beer Brewing Equipment

Technical Parameters for 3000L Beer Brewing Equipment

Output / Brew	3000L
Brew / Week	6~12
Output / Week	180,000~360,000L
Electric Supply	3phase/380(220, 415,440…)v/50 (60)Hz
Electric Supply	Single Phase/ 220(110, 240…)v/50(60)Hz
Heating Source	Electric/Steam/Directly Fired
Area Request	>150M2
Brewmaster	3

Note: 1hl=100liter, 1Gallon=3.7854liter, 1Barrel (BBL) =117Liter.

General specification for 3000L beer brewery plant

No.	Name	Components	Capacity	Parameter
1	Grain Milling Unit	Rolling Miller	800~1200kg/hr	Double roller Speed differential
		Flexible Auger	1-1.5t/h	Stainless steel screw PVC pipe
		Silo	1500L	SUS304
2	Brewhouse Unit	Mash tun	3500L	Steam jacket on bottom and side Agitator inside Wort hydrator mounted top of mash tun
		Lauter tun	3500L	Grain rake with VFD Laser cutting V-wire False Bottom Easyclean and detachable sparging spray ring Multihole wort collect ring(optional) Anti-rinser(optional)
		Kettle/Whirlpool Tun	3500L	Steam Jacket on bottom and side Steam vent with condensate ring for kettle stack
		Hot water tank	7000L
		Heat exchanger	35M2	SUS304 plate
3	Fermentation unit	Fermenter	35000L/7000L	Glyco cooling jacket on cone and bottom Side or top manway CIP arm and CO2 blow off arm Mechanical relief valve Shockproof pressure gauge Rotating racking arm Dry hopping port Carbonation stone Sight level
4	Filtration unit(optional)	Kieselguhr Filter	1000kg/hr	Pressured candle type DE filter
5	Bright beer tank	Bright beer tank	35000L/7000L	Glyco cooling jacket on cone and bottom Side or top manway CIP arm and CO2 blow off arm Mechanical relief valve Shockproof pressure gauge Rotating racking arm Dry hopping port Carbonation stone Sight level
6	Glycol Chilling Unit	Glycol Water Tank	4000L	Insulated conical top and sloped bottom
		Cold Water Tank	5000L	Dimple plate on side wall
		Chiller	15HPx2PCS
7	Control unit	Brewhouse controlling		PLC control with touch screen for special
7	Control unit	Fermentation Controling		PLC control with touch screen for special
8	CIP	Caustic Tank	300L	electric heating element inside
		Sterilization Tank	300L
		Transfer&Control
9	Others

Brewhouse System

Mash tun, Lauter tun, Boiling Kettle, Whirlpool tun in various combination
Hot water tank and cold water tank for optional in special combinations
Infusion or decoction brewing methods are designed exactly
Stainless steel cladding is even the unique because of easy maintenance and clean
Two stages or single stage heat exchanger for wort cooling
Completely stainless steel integrated work platform
Sanitary and efficiency wort pump
All pipings, pipes maniford and fittings

Fermentation system

Function: Used for keep wort fermentation or maturation.
Standard stainless steel conical cylindrical fermentation tanks
Single, double, triple or more size as brewhouse is common used in commercial breweries
Tanks quantity is exactly calculated by fermentation cycle for various beers
Roof walkway is for special request
Cooling method: dimple plate or glycol cooling jacket both bottom and top.
All manhole, valves, pressure gauges, fittings etc are included
Design pressure is 0.3MPa; Working pressure is 0.15MPa. (MPa can be customized).

Auxiliary Equipment

We offers all necessary peripheral equipment (bottling equiment) to ensure that your brewery / Brewpub has everything it needs for a high quality brew and the means to give your clients the best drinking experience.

— Malt Milling Unit

Function: It is used for malt milling.It is the first part of beer brewing equipment.
Component: Malt miller, belt, belt pulley, motor, and so on.
Material: Carbon steel or stainless steel for optional.
Flexible or steel auger or a bucket type conveyor to directly lift the milled grain to mash tun

— Cooling Unit

Insulated glycol water tank with or without copper coil for glycol liquid holding and mixing
Efficiency chillers or refrigerators with fryon to supply cooling energy
Sanitary centrifugal pump for glycol water recycle among tanks and heat exchanger
All pipes, fitting, insulation materials are included

— Controlling Unit

Electrical controlling cabinet with temperature, on-off controlling for brewhouse
Electrical controlling cabinet with temperature, on-off controlling for cooling parts
Temperature controller, thermocouple, solenoid valves etc are included
PLC with touch screen panel for special request

— Beer Dispense

Semiauto or automatic bottling machine with rinsing, filling, capping, labeling etc
Semiauto or automatic canning machine
Flash pasteurizer or tunnel pasteurizer is available

— Cleaning Unit

Function: Used for cleaning and washing.
Component: Disinfection tank, Alkali tank (with heating element), cleaning pump and etc. It is the seventh part of beer brewing equipment.
Purpose: Equipped with wheel, easy to move and operate, washing all tanks when it finishing brewing.

— Other Facilities

Steam boiler for brewhouse heating
Water treatment for brew water
Oil free air compressor
Brewery lab instruments for beer quality test

Product Details

1.Mirror Polishing

– Inside Polishing: Overall polishing to 0.4μm without dead corner . – Outside Polishing: Mirror polishing, smooth enough and passivating treatment. – Purpose: Make sure the inner tank smooth enough to avoid form any dead cornor which caused bad taste in the wort beer. Outer tanks looks more like an artwork.

2.100% WIG Welding

– All welding is TIG welding. – All welding is Full welding. – All welding is double side welding. – Purpose: The use of argon on the protection of metal welding material, So that welding can not be in contact with oxygen in the air, thus preventing the oxidation of welding consumables.Which Makes tanks durable and strong.

3.False bottom / Sieve plate

– Equipped in Lauter tank, Laser milling – Filter gap: 0.8mm – This filter plate is made on a complete stainless by CNC lathe, it is strong, filter fast and leak no any grist. Which has a good effect in Separating wort and impurities.

Fermenter

500L Beer Brewing Equipment