Brewhouse

Δ. 2-vessel: mash/lauter tank and kettle/whirlpool tank;
Δ. Combination tank: Mash lauter/whirlpool tank, kettle tank;
Δ. 3/4 vessels is also available if pub brewery space and operation needed;
Δ. Hot water tank optional

Material  Of All The Tanks

Interior stainless steel 2.5~3.0mm, exterior stainless steel/luxury red copper cladding 1.5~2.0mm
Δ.  High quality materials
The raw materials is SUS304 and SUS316, which require materials quality certificate.
We’ll test the materials quality using chemical agent when we receive the materials.
Δ.  Excellent appearance
The polishing standard of welding seam is 240 um, 60mm width. All of connection required turn up workmanship and all of welding seam required polishing, which is more smooth tank surface. We’re very serious about the excellent appearance of tanks.
Δ.  Insulation layer:  Polyurethane or rockwool, thickness 80~100mm

The Standard Of BreweryTank

Δ. We use plasma torch to cut the materials on the soft carpet, avoid to damaging the surface of stainless steel, and then we adopt double argon protection welding.
Δ. Volume:  Working volume and 20%-30%additional space.
Δ.  Inner Shell:  SUS304 materials, thickness 3mm, acid washing and passivation treatment, furthermore,polishing and mirror treatment are workable with different cost.
Δ. All of the inner surface connection using turnup workmanship and polishing round.
Δ. The normal pressure is 0.2Mpa, maximum test pressure is 0.4Mpa.
Δ. Cladding: SUS304, 2mmthickness, welding seam polishing, 60mm width.
Δ. All of the welding connection polishing treatment, more smooth