beer maturation

beer filler
06/06/2019
Serving Tank
04/06/2019

We generally use beer fermenter with cabonation stone or bright beer tank for beer maturation. Please look at the pictures below:

Specifications of the bright beer tank for beer maturation:

1 Material SUS 304
2 Outer TH 2mm
3 Inner TH 3mm
4 Insulation material PU
5 Insulation thickness 80mm
6 Manhole type Side manhole
7 Manhole demension DN350
8 CIP pipe Diameter 38mm
9 CIP ball rotating spray  ball
10 Temperature sensor PT100
11 Polishing 0.4micron
12 Design pressure 0.3Mpa
13 Working pressure 0.2Mpa
14 Cooling type Dimple cooling jacket
15 Cooling area According to real capacity you need
16 Cold medium inlet
17 Cold medium outlet
18 Pressure gauge Mechanical pressure relief valve gauge
19 Sample valve 1 pc
20 Drain outlet DN 32
21 Ice water magnetic valve 1 pc
22 Safety valve (PVRV) 1PC
23 pressure Regulators(Ice water solenoid valve(Belimo) 1PC
24 Liquid level indicator 1pc
25 Butterfly valve 3pcs
26 Saddle suppots With

 Specifications of beer fermentation tank for beer maturation:

1 Material SUS 304
2 Outer TH 2mm
3 Inner TH 3mm
4 Insulation material PU
5 Insulation thickness 80mm
6 Top type Doomed
7 Manhole type Side manhole
8 Manhole size 430mm*330mm
9 Cone degree 60 °
10 CIP pipe Diameter 38mm
11 CIP ball Rotating spray ball
12 Temperature sensor PT100
13 Side fitting thermowell diameter and length Inner: 6X180mm Outer:15mm
14 Support leg 3*SUS 304
15 Adjustable bolt 3pcs
16 Polishing 0.4micron
17 Design pressure 0.3Mpa
18 Working pressure 0.15Mpa
19 Cooling type Dimple cooling jacket
20 Cooling area 2.3m2/1.4m2…
21 Cooling jacket inlet DN 25
22 Cooling jacket outlet DN 38
23 Pressure gauge Electrical contact pressure gauge
24 Rotating Racking arm 1pc
25 Sample valve 1 pc
26 Drain outlet DN 32
27 Hop port DN 100
28 safety valve (PVRV) 1pc
29 Design pressure 0.3Mpa
30 Working pressure 0.15Mpa
31 Liquid level indicator 1pc
32 Pressure Regulator(Ice water solenoid valve(Belimo) 1PC
33 Butterfly valve 3pcs
34 Carbonation stone to add CO2 Yes

Features of bright beer tank (BBT) for beer maturation:

  1. Interior Shell: SUS304 full welded; TH=3mm
  2. Exterior Shell:SUS304 full welded; TH=2mm
  3. 100% TIG welding with pure argon gas shield
  4. Interior Finish: Overall polishing to 0.4-0.6 μm without dead corner
  5. Insulation: Polyurethane; TH=80mm
  6. Glycol Jacket: Dimpled plate on cone and side
  7. Stringent tank leakage test by water and pressured gas
  8. Stringent Jacket leakage test by water and pressured gas
  9. Dish top and bottom
  10. manway on top
  11. Carbonation port with stone
  12. Mechanical relief valve 2 bar on CIP arm
  13. 3 or 4pcs completely SUS304 heavy duty legs with leveling pad and legs support
  14. Complete valves, fittings and all parts.

 

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
Leave your phone number here, avoiding our mail to your spam.
Our operators are busy. Please try again later
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad