Introduction of beer fermentation tanks

Beer fermentation tanks are also called CCT’s (Cylindrical Conical Tanks), FV’s (Fermentation Vessel), conical fermenter,primary fermentor or unitanks as they are used both for fermenting and lagering.Fermenting is the process during which the yeast transforms the wort into beer.
Lagerings takes place after fermenting and is the time given to the beer to stabilize and age after fermenting.

TBE stainless steel fermenters can be individually temperature controlled through glycol jackets
and are mostly equipped with accessories such as overpressure and under pressure valve,
CIP cleaning jet, sanitary sample valve, manhole,etc
The design of TBE fermenters is based on our vast beer knowledge and especially the conical fermenter
bottom and the fact that we combine fermentation and maturation in the same vessel is very important.
When calculating your fermenting and lagering capacity and configuration sufficient time
for fermenting and lagering to produce quality beers must be taken into consideration.

Configuration of stainless steel beer fermentation tanks

Capacity: 100-10000L(+25% Headspace minimum)
Material:304
Pressure :Atmospheric
Accessories: butterfly valve
Interior Finish: Overall polishing to 0.4~0.6 μm without dead corner
Inltet and outlet
Four layer
Thickness:2MM for exterior shell, 80mm rock wood for insulations ,steam jacket , 3mm for interior jacket
Mirror polished
Conical bottom with tri-clamp top
Dished head and 60 degree cone bottom
CIP arm with 360° coverage CIP spraying ball